32×32 · 1024 beads · 17 colors

Shopping list

0%
ColorCodeBeads
AMidnight80-152017825
BCharcoal80-152072400
CDark Blue80-190081759
DDenim80-15253800
ECreme80-19002710
FWhite80-19001533
GCobalt80-15200463
HRed80-19005400
JPastel Yellow80-19056278
KLight Grey80-15181240
LBlack80-19018224
MCherry80-15961208
NLight Blue80-19009177
PYellow80-19003135
QBrown80-1901296
RGrey80-1901796
SPewter80-1520640
Total16384

About this pattern

Lighthouse at night is a free 32×32 fuse bead pattern by Sol. It uses 1024 beads in 17 colors, fits on 4 square pegboard(s) and takes about 35 minutes to place, plus ironing. It was made with Perler beads — switch the shopping list to another brand and every color is matched to the closest bead you can buy.

It is also an animation with 16 frames: build each frame as its own piece, or keep the GIF to share.

How to make it

  1. Sort the colors from the shopping list into small bowls — one per color makes placing much faster.
  2. Place the beads on the pegboard row by row, following the Pattern tab. Tick off each color as you finish it.
  3. Cover the design with ironing paper and iron on medium heat in slow circles for 10–20 seconds, until the beads fuse.
  4. Let it cool under a heavy book so it stays flat, then peel off the paper and lift it off the board.
  5. Flip the piece and iron the back lightly for extra strength.

Tips

  • Keep the iron moving in slow circles — pressing in one spot leaves flat dimples.
  • Medium heat and a little patience give the classic look where the bead holes stay open.
  • Buying beads? Get 10–20% extra of each color in case some are off-color or roll away.

What you need

  • 4 × square pegboard (29×29)
  • 1024 Perler beads in 17 colors
  • Ironing paper or parchment
  • A household iron (steam off)

FAQ

How many beads do I need for Lighthouse at night?

1024 beads in 17 colors. The most used is Midnight, with 7825 beads; the full list with color codes is in the shopping list.

What size pegboard do I need?

The design is 32×32 beads, so it needs 4 standard 29×29 square pegboard(s). Larger boards that clip together work too.

How long does it take to make?

About 35 minutes to place the beads, plus a few minutes to iron and cool.

Can I use Hama, Artkal or MARD beads instead?

Yes. It was made with Perler, but you can switch the brand above the shopping list and BeadPop matches every color to the closest bead of that brand. All 5 mm midi beads fit the same pegboards.

Can I print the pattern?

Yes — download the PDF chart for a printable, board-by-board version with symbols and a color list, or save the whole chart as a PNG.

More by Sol

All works

More patterns to try