Warming up the iron…Drag to rotate · scroll or pinch to zoom
Shopping list
0%| Color | Code | Beads | |
|---|---|---|---|
| AWhite | 80-19001 | 104 | |
| BHot Coral | 80-19059 | 67 | |
| COrange | 80-19004 | 45 | |
| DLemon | 80-15269 | 42 | |
| EGreen | 80-19080 | 29 | |
| FLight Grey | 80-15181 | 28 | |
| GLight Blue | 80-19009 | 24 | |
| HPastel Lavender | 80-19054 | 17 | |
| KCelery | 80-15263 | 3 | |
| JFrosted Lilac | 80-15267 | 3 | |
| Total | 362 |
About this pattern
Rainbow after rain is a free 29×29 fuse bead pattern by Sol. It uses 362 beads in 10 colors, fits on 1 square pegboard(s) and takes about 20 minutes to place, plus ironing. It was made with Perler beads — switch the shopping list to another brand and every color is matched to the closest bead you can buy.
How to make it
- Sort the colors from the shopping list into small bowls — one per color makes placing much faster.
- Place the beads on the pegboard row by row, following the Pattern tab. Tick off each color as you finish it.
- Cover the design with ironing paper and iron on medium heat in slow circles for 10–20 seconds, until the beads fuse.
- Let it cool under a heavy book so it stays flat, then peel off the paper and lift it off the board.
- Flip the piece and iron the back lightly for extra strength.
Tips
- Keep the iron moving in slow circles — pressing in one spot leaves flat dimples.
- Medium heat and a little patience give the classic look where the bead holes stay open.
- Buying beads? Get 10–20% extra of each color in case some are off-color or roll away.
What you need
- 1 × square pegboard (29×29)
- 362 Perler beads in 10 colors
- Ironing paper or parchment
- A household iron (steam off)
FAQ
How many beads do I need for Rainbow after rain?
362 beads in 10 colors. The most used is White, with 104 beads; the full list with color codes is in the shopping list.
What size pegboard do I need?
The design is 29×29 beads, so it needs 1 standard 29×29 square pegboard(s). Larger boards that clip together work too.
How long does it take to make?
About 20 minutes to place the beads, plus a few minutes to iron and cool.
Can I use Hama, Artkal or MARD beads instead?
Yes. It was made with Perler, but you can switch the brand above the shopping list and BeadPop matches every color to the closest bead of that brand. All 5 mm midi beads fit the same pegboards.
Can I print the pattern?
Yes — download the PDF chart for a printable, board-by-board version with symbols and a color list, or save the whole chart as a PNG.






