28×28 · 784 beads · 19 colors

Shopping list

0%
ColorCodeBeads
AMint80-152404828
BOrange80-190041745
CButterscotch80-190901456
DTan80-190351056
ECelery80-15263979
FFawn80-15205480
GLight Brown80-19021400
HPeriwinkle Blue80-19070352
JGingerbread80-15250256
KCreme80-19002208
LTangerine80-15246192
NBrown80-19012176
MBlush80-19063176
PBlack80-1901864
QLavender80-1518264
RCocoa80-1526248
SLight Pink80-1907932
TPink80-1908316
UCarnation Pink80-1527616
Total12544

About this pattern

Nap time (sleepy cat) is a free 28×28 fuse bead pattern by Lou. It uses 784 beads in 19 colors, fits on 1 square pegboard(s) and takes about 30 minutes to place, plus ironing. It was made with Perler beads — switch the shopping list to another brand and every color is matched to the closest bead you can buy.

It is also an animation with 16 frames: build each frame as its own piece, or keep the GIF to share.

How to make it

  1. Sort the colors from the shopping list into small bowls — one per color makes placing much faster.
  2. Place the beads on the pegboard row by row, following the Pattern tab. Tick off each color as you finish it.
  3. Cover the design with ironing paper and iron on medium heat in slow circles for 10–20 seconds, until the beads fuse.
  4. Let it cool under a heavy book so it stays flat, then peel off the paper and lift it off the board.
  5. Flip the piece and iron the back lightly for extra strength.

Tips

  • Keep the iron moving in slow circles — pressing in one spot leaves flat dimples.
  • Medium heat and a little patience give the classic look where the bead holes stay open.
  • Buying beads? Get 10–20% extra of each color in case some are off-color or roll away.

What you need

  • 1 × square pegboard (29×29)
  • 784 Perler beads in 19 colors
  • Ironing paper or parchment
  • A household iron (steam off)

FAQ

How many beads do I need for Nap time (sleepy cat)?

784 beads in 19 colors. The most used is Mint, with 4828 beads; the full list with color codes is in the shopping list.

What size pegboard do I need?

The design is 28×28 beads, so it needs 1 standard 29×29 square pegboard(s). Larger boards that clip together work too.

How long does it take to make?

About 30 minutes to place the beads, plus a few minutes to iron and cool.

Can I use Hama, Artkal or MARD beads instead?

Yes. It was made with Perler, but you can switch the brand above the shopping list and BeadPop matches every color to the closest bead of that brand. All 5 mm midi beads fit the same pegboards.

Can I print the pattern?

Yes — download the PDF chart for a printable, board-by-board version with symbols and a color list, or save the whole chart as a PNG.

More by Lou

All works

More patterns to try