24×24 · 576 beads · 17 colors

Shopping list

0%
ColorCodeBeads
ARobin's Egg80-152025744
BKiwi Lime80-190611620
CCreme80-190021201
DButterscotch80-19090882
EToasted Marshmallow80-15208247
FYellow80-19003229
GHoney80-15249126
HWhite80-1900195
JGreen80-1908054
KTan80-1903547
LDark Grey80-1909231
MCheddar80-1905722
NLight Pink80-1907918
POrange80-1900418
QBrown80-1901212
RPink80-1908312
SBlack80-1901810
Total10368

About this pattern

Hello, world! (hatching chick) is a free 24×24 fuse bead pattern by Ana. It uses 576 beads in 17 colors, fits on 1 square pegboard(s) and takes about 25 minutes to place, plus ironing. It was made with Perler beads — switch the shopping list to another brand and every color is matched to the closest bead you can buy.

It is also an animation with 18 frames: build each frame as its own piece, or keep the GIF to share.

How to make it

  1. Sort the colors from the shopping list into small bowls — one per color makes placing much faster.
  2. Place the beads on the pegboard row by row, following the Pattern tab. Tick off each color as you finish it.
  3. Cover the design with ironing paper and iron on medium heat in slow circles for 10–20 seconds, until the beads fuse.
  4. Let it cool under a heavy book so it stays flat, then peel off the paper and lift it off the board.
  5. Flip the piece and iron the back lightly for extra strength.

Tips

  • Keep the iron moving in slow circles — pressing in one spot leaves flat dimples.
  • Medium heat and a little patience give the classic look where the bead holes stay open.
  • Buying beads? Get 10–20% extra of each color in case some are off-color or roll away.

What you need

  • 1 × square pegboard (29×29)
  • 576 Perler beads in 17 colors
  • Ironing paper or parchment
  • A household iron (steam off)

FAQ

How many beads do I need for Hello, world! (hatching chick)?

576 beads in 17 colors. The most used is Robin's Egg, with 5744 beads; the full list with color codes is in the shopping list.

What size pegboard do I need?

The design is 24×24 beads, so it needs 1 standard 29×29 square pegboard(s). Larger boards that clip together work too.

How long does it take to make?

About 25 minutes to place the beads, plus a few minutes to iron and cool.

Can I use Hama, Artkal or MARD beads instead?

Yes. It was made with Perler, but you can switch the brand above the shopping list and BeadPop matches every color to the closest bead of that brand. All 5 mm midi beads fit the same pegboards.

Can I print the pattern?

Yes — download the PDF chart for a printable, board-by-board version with symbols and a color list, or save the whole chart as a PNG.

More by Ana

All works

More patterns to try